锚固站对BDS自主导航精度的影响分析     

龚晓颖  蔡诗响 《测绘通报》2020,(4):68-75

介绍了自主导航的轨道确定及时间同步观测方程。以北斗仿真全星座为对象，通过采用仿真星间及卫星与地面锚固站间观测值，进行了60 d自主导航解算，分别探讨了锚固站数量及锚固站观测连续性对北斗卫星导航系统（BDS）3类卫星自主导航精度的影响。结果表明：锚固站数量及观测连续性对RERR及CERR无影响；加入1个锚固站即可显著改进URE结果精度，继续增加锚固站数量虽然可进一步提高URE精度但其改进效果有限；锚固站观测中断时间越长，其对应自主导航精度越低。因此，在BDS自主导航运行模式下应保持较高的锚固站观测频次以保证自主导航精度；另外，锚固站数量及观测连续性对北斗系统3类卫星自主导航精度的影响无显著差异。  相似文献   

Full moment tensor inversion constrained by double-couple focal mechanism for induced seismicity*          下载免费PDF全文

Yuyang Tan  Haijiang Zhang  Junlun Li  Chen Yin  Furong Wu 《地震科学（英文版）》2020,33(4):177-193

In this study, we propose a new method to determine full moment tensor solution for induced seismicity. This method generalizes the full waveform matching algorithm we have developed to determine the double-couple (DC) focal mechanism based on the neighbourhood algorithm. One major difference between the new method and the former one is that we adopt a new misfit function to constrain the candidate moment tensor solutions with respect to a reference DC solution in addition to other misfit terms characterizing the waveform matching. Through synthetic tests using a real passive seismic survey geometry, the results show the new constraint can help better recover the DC components of inverted moment tensors. We further investigate how errors in the velocity model and source location affect the moment tensor solution. The synthetic test results indicate that the constrained inversion is robust in recovering both the DC and non-DC components. We also test the proposed method on several real induced events in an oil/gas field in Oman using the same observation system as synthetic tests. While it is found that the full moment tensor solutions without using the DC constraints have much larger non-DC components than solutions with the DC constraints, both solutions are able to fit the observed waveforms at similar levels. The synthetic and real test results suggest the proposed DC constrained inversion method can reliably retrieve full moment tensor solutions for the induced seismicity.  相似文献   

基于AUKF的框架结构离线模型更新混合试验方法     

陈凡  郭玉荣 《地震工程与工程振动》2020,(1):162-170

模型更新混合试验在传统混合试验方法的基础上更新与试验构件具有相同恢复力特性的构件,扩展了混合试验方法的应用范围。本文旨在提高模型更新混合试验的精度,降低试验的成本并简化模型更新混合试验方法的流程。自适应UKF(AUKF)算法在传统UKF的基础上加入方差自适应模块,能够减轻初始参数设定对参数识别结果的影响,本文基于AUKF提出一种模型更新混合试验方法。对以Bouc-Wen为恢复力模型的防屈曲约束支撑(BRB)进行低周反复加载虚拟试验,通过Matlab编制AUKF算法程序进行参数识别,验证了AUKF算法的高效准确性。对一榀8层4跨带BRB的钢框架进行混合试验数值仿真,结果表明离线模型更新试验结果较在线模型更新更接近真实结果,且简化了试验流程。  相似文献   

An evaluation of Guided Regularized Random Forest for classification and regression tasks in remote sensing     

《International Journal of Applied Earth Observation and Geoinformation》2020

New Earth observation missions and technologies are delivering large amounts of data. Processing this data requires developing and evaluating novel dimensionality reduction approaches to identify the most informative features for classification and regression tasks. Here we present an exhaustive evaluation of Guided Regularized Random Forest (GRRF), a feature selection method based on Random Forest. GRRF does not require fixing a priori the number of features to be selected or setting a threshold of the feature importance. Moreover, the use of regularization ensures that features selected by GRRF are non-redundant and representative. Our experiments based on various kinds of remote sensing images, show that GRRF selected features provides similar results to those obtained when using all the available features. However, the comparison between GRRF and standard random forest features shows substantial differences: in classification, the mean overall accuracy increases by almost 6% and, in regression, the decrease in RMSE almost reaches 2%. These results demonstrate the potential of GRRF for remote sensing image classification and regression. Especially in the context of increasingly large geodatabases that challenge the application of traditional methods.  相似文献   

多层构造油藏纵向细分计算单元对储量参数及结果的影响     

颜冠山  刘宗宾  宋洪亮  韩雪芳  王欣然 《地质与资源》2020,29(4):342-350

为满足油田中后期精细开发及后续调整挖潜的需要，亟需进行更精细的储量研究，其中最重要的一环就是纵向细分计算单元.对于多层构造油藏，纵向细分主要根据油层组内隔夹层分布特征、小层物性特征，细分到以小层或者分布特征和物性相近且纵向上连续分布的小层组合为计算单元.根据纵向细分计算单元前后储量参数选值的理论推导，结合储层的沉积展布特征，认为含油面积范围内无储层尖灭时，仅平面油层厚度差异较大的油藏平均有效厚度变小.含油面积范围内储层尖灭时，正常三角洲沉积储层的油藏各参数一般都变小；而辫状河三角洲沉积储层的油藏一般平均有效厚度变小，平均有效孔隙度和平均含油饱和度变大.这一结论可以有效指导储量评估过程中纵向细分计算单元方案划分，为同类油田的精细储量研究提供技术支撑.  相似文献   

2020年5月6日新疆乌恰5.0级和5月9日柯坪5.2级地震总结     

马亚伟  宋治平  杨文  解孟雨  苑争一  钟骏  李美  姚丽  邓世广  臧阳 《地震地磁观测与研究》2020,41(4):179-192

2020年5月6日、5月9日，新疆地区南天山西段先后发生乌恰5.0级和柯坪5.2级地震，系统总结2次地震发生前出现的地震活动和地球物理观测异常，其中：①地震活动：震前存在调制地震集中、地震窗、5级以上地震成组等中短期异常；②地球物理观测：2次地震震中附近震前出现形变、电磁和流体观测异常，其中形变异常3项、电磁异常4项、流体异常1项，主要分布在柯坪5.2级地震震中附近。通过对2次地震序列进行跟踪，发现：乌恰5.0级地震余震较少，震后60天内共记录M_L 3.0以上余震4次，最大震级为M_L 4.5；柯坪5.2级地震后余震较丰富，震后60天内共记录M_L 3.0以上余震10次，最大震级为M_L 4.7，计算得到序列h值为1.6，b值为0.73。综合分析认为，2020年5月新疆地区2次5级以上地震前存在的地震活动异常较少，但区域地震活动水平较强，主要存在具有中短期指示意义的地球物理观测异常。  相似文献   

双座串联大跨度斜拉桥粘滞阻尼器参数分析          下载免费PDF全文

沈文爱  黄鸣柳  朱宏平  何友娣  张强 《世界地震工程》2020,(4):155-162

以双座串联大跨度斜拉桥-珠海洪鹤大桥为背景，根据桥梁自振特性及场地效应，生成了三组人工波，采用纵向+2/3竖向的地震作用组合输入方式，通过非线性时程分析，系统的研究了粘滞阻尼器对双座串联大跨度斜拉桥减震性能的影响。同时为了确定粘滞阻尼器的最优参数，对粘滞阻尼器的阻尼系数C和速度指数α进行了参数敏感性分析。结果表明:设置纵向粘滞阻尼器能够显著减小双座串联斜拉桥的纵向位移响应，减小主梁在串联处发生碰撞的概率，同时改善主塔塔底结构受力情况，具有良好的耗能减震效果。综合考虑安全性、适用性和经济性等方面，最后给出针对洪鹤大桥的最优粘滞阻尼器参数:速度指数α为0.3，阻尼系数C为3 000kN/（m/s）^0.3。  相似文献   

2020年1月25日西藏丁青5.1级地震总结     

臧阳  薛艳  姚琪  解孟雨  苑争一  王阅兵  马亚伟  张小涛 《地震地磁观测与研究》2020,41(3):162-173

2020年1月25日，藏东昌都丁青地区发生5.1级地震，尽管此次地震发生在监测能力较低地区，但震前仍监测到小震调制比高值、低b值等地震活动中短期异常。文中系统总结了地震构造背景、震源物理参数、序列特征以及震前出现的地震活动和地球物理观测等异常，结果发现：震源机制解显示为拉张型破裂，最近断裂为巴青—类乌齐断裂；序列活动特征、序列h值和b值计算结果显示，此次地震为主余型地震序列。目前，藏东地区仍存在一些地震活动和地球物理观测异常，表明该地区存在发生6级以上地震的强震背景，丁青5.1级地震的发生未能缓解该地区强震危险性。  相似文献   

Enhancement of backtracking search algorithm for identifying soil parameters     

Yin-Fu Jin  Zhen-Yu Yin 《国际地质力学数值与分析法杂志》2020,44(9):1239-1261

In this paper, an enhanced backtracking search algorithm (so-called MBSA-LS) for parameter identification is proposed with two modifications: (a) modifying the mutation of original backtracking search algorithm (BSA) considering the contribution of current best individual for accelerating convergence speed and (b) novelly incorporating an efficient differential evolution (DE) as local search for improving the quality of population. The proposed MBSA-LS is first validated with better performance than the original BSA and some other typical state-of-the-art optimization algorithms on a benchmark of soil parameter identification in terms of effectiveness, efficiency, and robustness. Then, the efficiency of the MBSA-LS is further illustrated by two representative cases: identifying soil parameters from both laboratory tests and field measurements. All comparisons demonstrate that the proposed MBSA-LS algorithm can give accurate results in a short time. Finally, to conveniently solve the problems of parameter identification, a practical tool ErosOpt for parameter identification is developed by integrating the proposed MBSA-LS and some other efficient algorithms for readers to conduct the parameter identification using optimisation algorithms.  相似文献   

利用InSAR资料反演宁洱Ms6.4地震震源参数及库仑应力变化     

陈晨月  冯光财  高华  杨怀宁 《大地测量与地球动力学》2019,39(3):295-301

首先利用ALOS PALSAR数据，通过D-InSAR技术获取2007-06-03云南宁洱MS6.4地震的同震形变场，然后基于Okada弹性半空间位错模型反演该地震的断层几何以及精细滑动分布，最后计算宁洱地震后周边断层的静态库仑应力变化。结果表明，形变主要集中在西盘，最大视线向形变量为51.6 cm；反演得到的震源位置为23.05°N、101.02°E，深度3 km，断层走向145°，倾向49.5°，平均滑动角153°，发震断层为NNW向普洱断裂，断层活动以右旋走滑为主，兼具逆冲分量；断层面最大滑动量为1.2 m，反演得到的震级为MW619。基于库仑应力场发现，磨黑断裂处于库仑应力增加区域，而2014年景谷地震位于负值区域。结合实地考察资料和反演结果表明，宁洱地震为浅源地震，但断层并未出露地表。  相似文献